For detergent manufacturers formulating with sodium lauryl ether sulphate (SLES), the selection of a dependable filler is a critical production decision. While SLES drives the foaming and degreasing action, it is sodium sulphate (Na2SO4) that provides the necessary bulk, flowability, and cost structure without compromising cleaning power. At Hailei Chemical, we supply a consistent 99% purity anhydrous sodium sulphate precisely engineered for SLES-based powder detergents. This article examines why sodium sulphate remains the filler of choice, how its chemical identity interacts with sodium lauryl ether sulphate, and what procurement professionals must verify when sourcing high-purity material for competitive production lines.
Modern laundry powders are complex blends where surfactants like sodium lauryl ether sulphate deliver stain removal, while fillers create the right powder density, prevent caking, and reduce cost per kilo. Sodium sulphate fulfills this role for several technical reasons:
When working with sodium lauryl ether sulphate, which is typically supplied as a 70% active paste or high-concentration liquid, formulators need a dry carrier that can absorb residual moisture and enable spray-drying or dry-blending processes. Anhydrous sodium sulphate excels here, acting as a processing aid that streamlines production.
Buyers often ask, “what is sodium sulfate formula” to confirm they are ordering the correct compound. The answer is Na2SO4, a neutral salt of sulfuric acid and sodium hydroxide. In its anhydrous form it contains no water of crystallization, while the decahydrate (Na2SO4·10H2O) is known as Glauber’s salt. For detergent manufacturing, the anhydrous variety is mandatory because the hydrated form would introduce unwanted moisture, increase shipping costs, and throw off formulation ratios.
From a chemical perspective, sodium sulphate does not directly react with sodium lauryl ether sulphate. SLES is an anionic surfactant with a sulfate head group, and the presence of sulfate ions (SO4²⁻) from sodium sulphate can actually contribute to a mild electrolyte effect that thickens liquid surfactant systems. In powder detergents, this interaction is subtle but beneficial: sodium sulphate helps control the rate of dissolution, preventing lump formation when the powder contacts water and allowing the SLES to foam effectively. This synergy makes the pairing of high-purity Na2SO4 with SLES a standard in the industry.
When your formulation centers on sodium lauryl ether sulphate, every additive must meet strict purity thresholds. Weifang Hailei Fine Chemical supplies anhydrous sodium sulphate at 99% min purity, with controlled iron (Fe ≤ 0.002%) and water-insoluble matter (≤ 0.05%). Key technical parameters include:
| Parameter | Specification |
|---|---|
| Na2SO4 content | ≥ 99.0% |
| Moisture | ≤ 0.2% |
| Water insolubles | ≤ 0.05% |
| Whiteness | ≥ 82 (Hunter Lab) |
| pH (5% solution) | 6.0–8.0 |
| Bulk density | 1.3–1.6 g/cm³ |
This anhydrous sodium sulphate is produced via the forced-evaporation process from natural brine, resulting in a free-flowing, white crystalline powder that mixes evenly with SLES paste or spray-dried granules. The low moisture content is especially critical: excessive water can hydrolyze sodium lauryl ether sulphate during storage, leading to off-odors and reduced performance.
Procurement teams frequently encounter multiple names for the same substance. What is sodium sulphate common name in the chemical market? It depends on the form:
When ordering for detergent lines that rely on sodium lauryl ether sulphate, always specify “anhydrous sodium sulphate 99%” to avoid receiving the decahydrate or lower-purity salt cake, which can contain chlorides that corrode equipment and harm surfactant stability.
A pressing query for any detergent factory is sodium sulphate wholesale price. Contract pricing for industrial-grade anhydrous sodium sulphate typically ranges from USD 80 to USD 160 per metric ton FOB China, depending on purity, particle size, and packaging (25 kg bags, 1000 kg supersacks, or bulk). However, price alone is a poor supplier selection metric. Buyers must evaluate:
Hailei Chemical’s sodium sulphate is produced in Weifang, Shandong, one of China’s largest chemical manufacturing hubs. Our integrated supply chain and 20+ years of export experience minimize lead times and quality risks for detergent producers worldwide.
Detergent powders formulated with sodium lauryl ether sulphate are manufactured by two main routes: high-temperature spray drying and post-addition dry blending. In both cases, sodium sulphate strongly influences process efficiency.
In the spray-drying tower, a slurry of SLES, builders (zeolites or sodium carbonate), and sodium sulphate is atomized into a hot air stream. The sodium sulphate recrystallizes as the water evaporates, forming lightweight, absorbent beads. A high-purity, fine-grade Na2SO4 ensures that the slurry remains pumpable and that the dried powder has a uniform particle distribution. If the sodium sulphate contains insoluble grit or coarse crystals, nozzle clogging and irregular bead formation result, increasing rework.
Many modern high-density powders are produced by dry neutralization or agglomeration. Here, sodium sulphate is blended with a pre-neutralized SLES paste and other granular components. The anhydrous sulphate absorbs excess moisture, preventing the formation of sticky agglomerates. Its cubic crystal habit contributes to excellent flow, allowing the mix to travel smoothly through pneumatic conveyors and packing machines.
When purchasing anhydrous sodium sulphate for use alongside sodium lauryl ether sulphate, request a Certificate of Analysis (CoA) that includes at least these tests:
While this article focuses on the interplay with sodium lauryl ether sulphate, sodium sulphate’s versatility extends to glass manufacturing (as a fining agent), textile dyeing (to level direct and reactive dyes), and kraft paper pulping (as a make-up chemical in the recovery cycle). Hailei Chemical supplies sodium sulphate to all these sectors with tailored specs. The same 99% anhydrous grade used in SLES detergents also satisfies the stringent requirements of float glass production, where it prevents scum formation and improves melt homogenization.
Detergent formulators sometimes consider replacing sodium sulphate with alternatives such as sodium chloride, sodium carbonate, or even bentonite clay to reduce costs or achieve unique properties. A comparison reveals why Na2SO4 remains superior when sodium lauryl ether sulphate is the primary surfactant:
Thus, sodium sulphate remains the most chemically compatible, cost-effective, and consumer-acceptable filler for SLES systems.
Sodium sulphate is listed on all major chemical inventories (TSCA, EINECS, DSL) and is not classified as hazardous. However, detergent brands committed to sustainability should verify that their anhydrous sodium sulphate comes from a supplier with responsible waste management and low-carbon production methods. Hailei Chemical recovers process heat and minimizes water consumption, aligning with the green procurement goals of multinational FMCG companies. The biodegradability of SLES is not negatively impacted by sodium sulphate; sulfate ions exist naturally in water bodies and pose no ecotoxicity concerns at typical laundry discharge levels.
Smart buyers treat sodium sulphate not as a commodity afterthought but as a strategic material. Follow these steps to optimize sourcing:
Myth 1: “Sodium sulphate is just a cheap filler and adds no value.”
Fact: It enhances product aesthetics, controls density, and prevents caking, directly impacting consumer brand perception.
Myth 2: “Any industrial-grade sodium sulphate will work with SLES.”
Fact: Impure grades introduce chloride and iron that shorten shelf life and can cause equipment corrosion.
Myth 3: “Anhydrous and hydrated are interchangeable.”
Fact: The decahydrate (what is sodium sulphate common name? Glauber’s salt) contains over 55% water by weight. Using it in an SLES powder formula would create a sticky mess and ruin the surfactant balance.
Detergent manufacturers who rely on sodium lauryl ether sulphate as a key surfactant cannot afford filler inconsistency. Weifang Hailei Fine Chemical Co., Ltd. produces a uniform, 99% pure anhydrous sodium sulphate that meets the world’s most demanding powder detergent specifications. Our technical team understands the surfactant-filler interface and can advise on optimal particle size, bulk density, and packaging for your production line.
Whether you are expanding capacity, reformulating for cost reduction, or entering new markets, source your sodium sulphate from a partner with a proven track record. Request a quote today or visit our sodium sulphate product page to download the full technical data sheet and request a sample.
For detergent manufacturers formulating with sodium lauryl ether sulphate (SLES), the selection of a dependable filler is a critical production decision. While SLES drives the foaming and degreasing action, it is sodium sulphate (Na2SO4) that provides the necessary bulk, flowability, and cost structure without compromising cleaning power. At Hailei Chemical, we supply a consistent 99% purity anhydrous sodium sulphate precisely engineered for SLES-based powder detergents. This article examines why sodium sulphate remains the filler of choice, how its chemical identity interacts with sodium lauryl ether sulphate, and what procurement professionals must verify when sourcing high-purity material for competitive production lines.
Modern laundry powders are complex blends where surfactants like sodium lauryl ether sulphate deliver stain removal, while fillers create the right powder density, prevent caking, and reduce cost per kilo. Sodium sulphate fulfills this role for several technical reasons:
When working with sodium lauryl ether sulphate, which is typically supplied as a 70% active paste or high-concentration liquid, formulators need a dry carrier that can absorb residual moisture and enable spray-drying or dry-blending processes. Anhydrous sodium sulphate excels here, acting as a processing aid that streamlines production.
Buyers often ask, “what is sodium sulfate formula” to confirm they are ordering the correct compound. The answer is Na2SO4, a neutral salt of sulfuric acid and sodium hydroxide. In its anhydrous form it contains no water of crystallization, while the decahydrate (Na2SO4·10H2O) is known as Glauber’s salt. For detergent manufacturing, the anhydrous variety is mandatory because the hydrated form would introduce unwanted moisture, increase shipping costs, and throw off formulation ratios.
From a chemical perspective, sodium sulphate does not directly react with sodium lauryl ether sulphate. SLES is an anionic surfactant with a sulfate head group, and the presence of sulfate ions (SO4²⁻) from sodium sulphate can actually contribute to a mild electrolyte effect that thickens liquid surfactant systems. In powder detergents, this interaction is subtle but beneficial: sodium sulphate helps control the rate of dissolution, preventing lump formation when the powder contacts water and allowing the SLES to foam effectively. This synergy makes the pairing of high-purity Na2SO4 with SLES a standard in the industry.
When your formulation centers on sodium lauryl ether sulphate, every additive must meet strict purity thresholds. Weifang Hailei Fine Chemical supplies anhydrous sodium sulphate at 99% min purity, with controlled iron (Fe ≤ 0.002%) and water-insoluble matter (≤ 0.05%). Key technical parameters include:
| Parameter | Specification |
|---|---|
| Na2SO4 content | ≥ 99.0% |
| Moisture | ≤ 0.2% |
| Water insolubles | ≤ 0.05% |
| Whiteness | ≥ 82 (Hunter Lab) |
| pH (5% solution) | 6.0–8.0 |
| Bulk density | 1.3–1.6 g/cm³ |
This anhydrous sodium sulphate is produced via the forced-evaporation process from natural brine, resulting in a free-flowing, white crystalline powder that mixes evenly with SLES paste or spray-dried granules. The low moisture content is especially critical: excessive water can hydrolyze sodium lauryl ether sulphate during storage, leading to off-odors and reduced performance.
Procurement teams frequently encounter multiple names for the same substance. What is sodium sulphate common name in the chemical market? It depends on the form:
When ordering for detergent lines that rely on sodium lauryl ether sulphate, always specify “anhydrous sodium sulphate 99%” to avoid receiving the decahydrate or lower-purity salt cake, which can contain chlorides that corrode equipment and harm surfactant stability.
A pressing query for any detergent factory is sodium sulphate wholesale price. Contract pricing for industrial-grade anhydrous sodium sulphate typically ranges from USD 80 to USD 160 per metric ton FOB China, depending on purity, particle size, and packaging (25 kg bags, 1000 kg supersacks, or bulk). However, price alone is a poor supplier selection metric. Buyers must evaluate:
Hailei Chemical’s sodium sulphate is produced in Weifang, Shandong, one of China’s largest chemical manufacturing hubs. Our integrated supply chain and 20+ years of export experience minimize lead times and quality risks for detergent producers worldwide.
Detergent powders formulated with sodium lauryl ether sulphate are manufactured by two main routes: high-temperature spray drying and post-addition dry blending. In both cases, sodium sulphate strongly influences process efficiency.
In the spray-drying tower, a slurry of SLES, builders (zeolites or sodium carbonate), and sodium sulphate is atomized into a hot air stream. The sodium sulphate recrystallizes as the water evaporates, forming lightweight, absorbent beads. A high-purity, fine-grade Na2SO4 ensures that the slurry remains pumpable and that the dried powder has a uniform particle distribution. If the sodium sulphate contains insoluble grit or coarse crystals, nozzle clogging and irregular bead formation result, increasing rework.
Many modern high-density powders are produced by dry neutralization or agglomeration. Here, sodium sulphate is blended with a pre-neutralized SLES paste and other granular components. The anhydrous sulphate absorbs excess moisture, preventing the formation of sticky agglomerates. Its cubic crystal habit contributes to excellent flow, allowing the mix to travel smoothly through pneumatic conveyors and packing machines.
When purchasing anhydrous sodium sulphate for use alongside sodium lauryl ether sulphate, request a Certificate of Analysis (CoA) that includes at least these tests:
While this article focuses on the interplay with sodium lauryl ether sulphate, sodium sulphate’s versatility extends to glass manufacturing (as a fining agent), textile dyeing (to level direct and reactive dyes), and kraft paper pulping (as a make-up chemical in the recovery cycle). Hailei Chemical supplies sodium sulphate to all these sectors with tailored specs. The same 99% anhydrous grade used in SLES detergents also satisfies the stringent requirements of float glass production, where it prevents scum formation and improves melt homogenization.
Detergent formulators sometimes consider replacing sodium sulphate with alternatives such as sodium chloride, sodium carbonate, or even bentonite clay to reduce costs or achieve unique properties. A comparison reveals why Na2SO4 remains superior when sodium lauryl ether sulphate is the primary surfactant:
Thus, sodium sulphate remains the most chemically compatible, cost-effective, and consumer-acceptable filler for SLES systems.
Sodium sulphate is listed on all major chemical inventories (TSCA, EINECS, DSL) and is not classified as hazardous. However, detergent brands committed to sustainability should verify that their anhydrous sodium sulphate comes from a supplier with responsible waste management and low-carbon production methods. Hailei Chemical recovers process heat and minimizes water consumption, aligning with the green procurement goals of multinational FMCG companies. The biodegradability of SLES is not negatively impacted by sodium sulphate; sulfate ions exist naturally in water bodies and pose no ecotoxicity concerns at typical laundry discharge levels.
Smart buyers treat sodium sulphate not as a commodity afterthought but as a strategic material. Follow these steps to optimize sourcing:
Myth 1: “Sodium sulphate is just a cheap filler and adds no value.”
Fact: It enhances product aesthetics, controls density, and prevents caking, directly impacting consumer brand perception.
Myth 2: “Any industrial-grade sodium sulphate will work with SLES.”
Fact: Impure grades introduce chloride and iron that shorten shelf life and can cause equipment corrosion.
Myth 3: “Anhydrous and hydrated are interchangeable.”
Fact: The decahydrate (what is sodium sulphate common name? Glauber’s salt) contains over 55% water by weight. Using it in an SLES powder formula would create a sticky mess and ruin the surfactant balance.
Detergent manufacturers who rely on sodium lauryl ether sulphate as a key surfactant cannot afford filler inconsistency. Weifang Hailei Fine Chemical Co., Ltd. produces a uniform, 99% pure anhydrous sodium sulphate that meets the world’s most demanding powder detergent specifications. Our technical team understands the surfactant-filler interface and can advise on optimal particle size, bulk density, and packaging for your production line.
Whether you are expanding capacity, reformulating for cost reduction, or entering new markets, source your sodium sulphate from a partner with a proven track record. Request a quote today or visit our sodium sulphate product page to download the full technical data sheet and request a sample.
For detergent manufacturers formulating with sodium lauryl ether sulphate (SLES), the selection of a dependable filler is a critical production decision. While SLES drives the foaming and degreasing action, it is sodium sulphate (Na2SO4) that provides the necessary bulk, flowability, and cost structure without compromising cleaning power. At Hailei Chemical, we supply a consistent 99% purity anhydrous sodium sulphate precisely engineered for SLES-based powder detergents. This article examines why sodium sulphate remains the filler of choice, how its chemical identity interacts with sodium lauryl ether sulphate, and what procurement professionals must verify when sourcing high-purity material for competitive production lines.
Modern laundry powders are complex blends where surfactants like sodium lauryl ether sulphate deliver stain removal, while fillers create the right powder density, prevent caking, and reduce cost per kilo. Sodium sulphate fulfills this role for several technical reasons:
When working with sodium lauryl ether sulphate, which is typically supplied as a 70% active paste or high-concentration liquid, formulators need a dry carrier that can absorb residual moisture and enable spray-drying or dry-blending processes. Anhydrous sodium sulphate excels here, acting as a processing aid that streamlines production.
Buyers often ask, “what is sodium sulfate formula” to confirm they are ordering the correct compound. The answer is Na2SO4, a neutral salt of sulfuric acid and sodium hydroxide. In its anhydrous form it contains no water of crystallization, while the decahydrate (Na2SO4·10H2O) is known as Glauber’s salt. For detergent manufacturing, the anhydrous variety is mandatory because the hydrated form would introduce unwanted moisture, increase shipping costs, and throw off formulation ratios.
From a chemical perspective, sodium sulphate does not directly react with sodium lauryl ether sulphate. SLES is an anionic surfactant with a sulfate head group, and the presence of sulfate ions (SO4²⁻) from sodium sulphate can actually contribute to a mild electrolyte effect that thickens liquid surfactant systems. In powder detergents, this interaction is subtle but beneficial: sodium sulphate helps control the rate of dissolution, preventing lump formation when the powder contacts water and allowing the SLES to foam effectively. This synergy makes the pairing of high-purity Na2SO4 with SLES a standard in the industry.
When your formulation centers on sodium lauryl ether sulphate, every additive must meet strict purity thresholds. Weifang Hailei Fine Chemical supplies anhydrous sodium sulphate at 99% min purity, with controlled iron (Fe ≤ 0.002%) and water-insoluble matter (≤ 0.05%). Key technical parameters include:
| Parameter | Specification |
|---|---|
| Na2SO4 content | ≥ 99.0% |
| Moisture | ≤ 0.2% |
| Water insolubles | ≤ 0.05% |
| Whiteness | ≥ 82 (Hunter Lab) |
| pH (5% solution) | 6.0–8.0 |
| Bulk density | 1.3–1.6 g/cm³ |
This anhydrous sodium sulphate is produced via the forced-evaporation process from natural brine, resulting in a free-flowing, white crystalline powder that mixes evenly with SLES paste or spray-dried granules. The low moisture content is especially critical: excessive water can hydrolyze sodium lauryl ether sulphate during storage, leading to off-odors and reduced performance.
Procurement teams frequently encounter multiple names for the same substance. What is sodium sulphate common name in the chemical market? It depends on the form:
When ordering for detergent lines that rely on sodium lauryl ether sulphate, always specify “anhydrous sodium sulphate 99%” to avoid receiving the decahydrate or lower-purity salt cake, which can contain chlorides that corrode equipment and harm surfactant stability.
A pressing query for any detergent factory is sodium sulphate wholesale price. Contract pricing for industrial-grade anhydrous sodium sulphate typically ranges from USD 80 to USD 160 per metric ton FOB China, depending on purity, particle size, and packaging (25 kg bags, 1000 kg supersacks, or bulk). However, price alone is a poor supplier selection metric. Buyers must evaluate:
Hailei Chemical’s sodium sulphate is produced in Weifang, Shandong, one of China’s largest chemical manufacturing hubs. Our integrated supply chain and 20+ years of export experience minimize lead times and quality risks for detergent producers worldwide.
Detergent powders formulated with sodium lauryl ether sulphate are manufactured by two main routes: high-temperature spray drying and post-addition dry blending. In both cases, sodium sulphate strongly influences process efficiency.
In the spray-drying tower, a slurry of SLES, builders (zeolites or sodium carbonate), and sodium sulphate is atomized into a hot air stream. The sodium sulphate recrystallizes as the water evaporates, forming lightweight, absorbent beads. A high-purity, fine-grade Na2SO4 ensures that the slurry remains pumpable and that the dried powder has a uniform particle distribution. If the sodium sulphate contains insoluble grit or coarse crystals, nozzle clogging and irregular bead formation result, increasing rework.
Many modern high-density powders are produced by dry neutralization or agglomeration. Here, sodium sulphate is blended with a pre-neutralized SLES paste and other granular components. The anhydrous sulphate absorbs excess moisture, preventing the formation of sticky agglomerates. Its cubic crystal habit contributes to excellent flow, allowing the mix to travel smoothly through pneumatic conveyors and packing machines.
When purchasing anhydrous sodium sulphate for use alongside sodium lauryl ether sulphate, request a Certificate of Analysis (CoA) that includes at least these tests:
While this article focuses on the interplay with sodium lauryl ether sulphate, sodium sulphate’s versatility extends to glass manufacturing (as a fining agent), textile dyeing (to level direct and reactive dyes), and kraft paper pulping (as a make-up chemical in the recovery cycle). Hailei Chemical supplies sodium sulphate to all these sectors with tailored specs. The same 99% anhydrous grade used in SLES detergents also satisfies the stringent requirements of float glass production, where it prevents scum formation and improves melt homogenization.
Detergent formulators sometimes consider replacing sodium sulphate with alternatives such as sodium chloride, sodium carbonate, or even bentonite clay to reduce costs or achieve unique properties. A comparison reveals why Na2SO4 remains superior when sodium lauryl ether sulphate is the primary surfactant:
Thus, sodium sulphate remains the most chemically compatible, cost-effective, and consumer-acceptable filler for SLES systems.
Sodium sulphate is listed on all major chemical inventories (TSCA, EINECS, DSL) and is not classified as hazardous. However, detergent brands committed to sustainability should verify that their anhydrous sodium sulphate comes from a supplier with responsible waste management and low-carbon production methods. Hailei Chemical recovers process heat and minimizes water consumption, aligning with the green procurement goals of multinational FMCG companies. The biodegradability of SLES is not negatively impacted by sodium sulphate; sulfate ions exist naturally in water bodies and pose no ecotoxicity concerns at typical laundry discharge levels.
Smart buyers treat sodium sulphate not as a commodity afterthought but as a strategic material. Follow these steps to optimize sourcing:
Myth 1: “Sodium sulphate is just a cheap filler and adds no value.”
Fact: It enhances product aesthetics, controls density, and prevents caking, directly impacting consumer brand perception.
Myth 2: “Any industrial-grade sodium sulphate will work with SLES.”
Fact: Impure grades introduce chloride and iron that shorten shelf life and can cause equipment corrosion.
Myth 3: “Anhydrous and hydrated are interchangeable.”
Fact: The decahydrate (what is sodium sulphate common name? Glauber’s salt) contains over 55% water by weight. Using it in an SLES powder formula would create a sticky mess and ruin the surfactant balance.
Detergent manufacturers who rely on sodium lauryl ether sulphate as a key surfactant cannot afford filler inconsistency. Weifang Hailei Fine Chemical Co., Ltd. produces a uniform, 99% pure anhydrous sodium sulphate that meets the world’s most demanding powder detergent specifications. Our technical team understands the surfactant-filler interface and can advise on optimal particle size, bulk density, and packaging for your production line.
Whether you are expanding capacity, reformulating for cost reduction, or entering new markets, source your sodium sulphate from a partner with a proven track record. Request a quote today or visit our sodium sulphate product page to download the full technical data sheet and request a sample.